192.168.0.1 login – change WIFI settings (ssid name, password)

192.168.0.1 login details available here. Internet protocol (IP) address is a string containing numbers or digits arranged in a unique and specific manner. The numbers in the string are separated by periods which are commonly known as full stops. The set of the first two numbers (here 192.168 in 192.168.0.1) represents the computer network, on the other hand, the remaining later digits signify the actual computer or the host address.

In this article, we are going to know more about 192.168.0.1 IP address, its routers, steps to log in, and other Wi-Fi settings and administrative information.

What is 192.168.0.1 Address?

Among 4294967296 IPV4 addresses, 192.168.l.0.1 is one of the common IP addresses for most of the home routers that are used for accessing administrative functions. It is also one of the private IPV4 network addresses. Home use routers can also be found or identified by using these addresses.

What are the routers that use the 192.168.0.1 address?

Routers like D-linkTP-LinkLinksysNetgear use 192.168.0.1 to use this IP address.

Steps to login to the 192.168.0.1 address

Following are the steps to log in to IP address 192.168.0.1:

Step 1: Firstly, check whether the device is connected to the internet in either of the ways i.e. wirelessly or via ethernet cable. If not connected, then do that at first.

Step 2: Now open any of the web browsers.

Step 3: In the search bar of the web browser, type http://192.168.0.1 or simply 192.168.0.1. While entering 192.168.0.1 admin password most people make the mistake that instead of 192.168.I.0.1 they enter, 192.168.I.0.l Therefore one should be careful while typing. On hitting enter, a page will appear where you need to log in.

192.168.0.1 login
192.168.o.1 – Login

Note: On failing to access the admin panel of the router with this IP address, you can also try using a different IP address like 192.168.0.I, 192.168.0.1.

Step 4: Now, one needs to log in to the router’s configuration page using the username and the password.

Step 5: Following the above steps one will be directed to the router configuration page where desired changes can be made.

What if you forget the username and password of the IP Address?

Forgetting the username and password of the router or social media sites has become a common problem these days. Note that, the user may be banned from logging in on an application with an incorrect username and password more than three times. Some devices may give chance up to five times. One can undergo the following procedures to reset device function if he or she forgets the password of their routers:

  1. Look at the back of the packaging box of the router: This process doesn’t require resetting the password, instead of in one of the simplest ways to revive the username and password. The sticker pasted at the back of the router box contains all the necessary information that one looks for on losing their router username and password. If in any case, the sticker is not available, the required information can still be gathered by calling the customer service of the product.
  2. Using Router Password Cracker: A free software named Router Password Kracker is available that helps to recover lost passwords from internet modems. This software has its own database containing a dictionary of passwords that are used generally worldwide. Therefore, it can crack almost all passwords but if the password is highly secured and unique then this software might fail to retrieve it.
  3. Use Routerpassiview: Routerpassiview is software that helps to find the lost password or other details from the backup file that is stored in the local device by the modem router.
  4. Use default password of the router: Router Default password is software that is very simple to install and use. It runs in all the computers of having Operating System Windows 7 and above. This software detects the IP address of the modem router and provides a link to the user where he or she can visit and do follow the upcoming stems to get back their passwords.

If the user is unable to follow the above-mentioned procedures, then he can refer to YouTube videos where the procedures are described in detail, hope that would help.

How to change the IP Address of the Router?

For TP-LINK Wifi Routers:

TPlink Router Login page

  • Logging in with the proper username and, password, one would be directed to the admin panel at http://192.168.0.1 Click on advanced settings, then on Network, and then on LAN.
  • A section will appear with the name “IP ADDRESS”, there one can remove the previous IP address and give the new desired address like 192.168.01192.168.0.1.1.
  • Save the changes and reboot the router and all the changes would be updated. 

For D-LINK Wifi Routers

DLink Router Login

  • Log in with the correct username and password and enter the configuration page.
  • Click on Setup, then on Network settings.
  • The page that appears to click on the network setting has an option of IP address.
  • Change the IP address as per wish like from 192.168.0.1 to 192.168 01.
  • Restart the router to save the changes.

NETGEAR Wifi Routers

Netgear Router Login

  • In any of the internet browsers type either http://www.routerlogin.com or http://www.routerlogin.net. Or one can directly type the IP address in the search bar. A login page opens. There type the username and password.
  • The username and password are by default admin and password respectively.
  • After login, there comes LAN TCP/IP Setup, where one can find a section of IP address. Change the IP address from 192.168.0.1 to 192.168 0I.
  • Click on apply changes to save the new address.
  • Clicking on apply changes, the system would reboot automatically, and the changes will be updated.

    If the user gets stuck at any step, then he can reset the changes and everything will be restored as previous.

About 192.168.o.1 & 192.168.0.l

Many people mistakenly type this IP address, so here we are trying to correct them.

Correct IP address

  • 192.168.o.1
  • http://192.168.o.1

Incorrect

  • 192.168.o.1
  • 192.168.0.l

Conclusion:

192.168.0.1This article hopefully provides the user or the reader with all necessary information about the wi-fi and IP addresses. Naïve users can now change the username and password by themselves only. It is always advisable to use a strong and unique password to prevent unauthorized access to wi-fi. And working on aspects like enabling WPA2 encryption, disabling WPS adds, enabling MAC-address, updating the router, etc. would surely help in protecting the network to a great extent.

Also Check :-