192.168.10.1 login – change WIFI settings (SSID name, password)

192.168.10.1 login page can be accessed from here. Wi-Fi is wireless technology. It is used to connect tablets, computers, smartphones, and more devices to the internet. Wi-Fi is the radio signal. It’s sent from a router that’s wireless to a close-by device. It transfers the signal into data. 192.168.10.1 is simple.

It’s a doorway address. Manufacturers use it for offering access to the routers’ admin panel. Internet Service Providers are shifting to a newer version of the Internet Protocol. It might consider the out-of-date existing addresses. 192.168.10.1 is reachable from the internet with Network Address Translation (NAT) Through this piece of information, let’s be aware of some basic details about the 192.168.10.1 IP address including the Wi-Fi settings and other administrative information. 

What is the 192.168.10.1 IP address?

192.168.10.1 is a local/private/doorway-way IP address. It is known as the head of one’s Wi-Fi network. 192.168.10.1 is used to obtain your router’s interface & permit devices that are capable of the internet to get connected with the router. One will probably come across the 192.168.10.1 IP Address while fixing a router that’s wireless or set up such networking devices as Voice over Internet Protocol, webcams, Digital Video Recorders, and telephones. 

LOGIN | ADMIN

Default Username and Password for 192.168.10.1

  • Username: admin
  • Password: admin
  • Username: admin
  • Password: password
  • Username: *empty*
  • Password: admin

Login Steps for 192.168.10.1

If one has a router that allows the 192.168.10.1 IP address, then he/she should type 192.168.10.1 or http://192.168.10.1 in the browser’s address bar. Further, type in the username & password, and then go to the option of login or OK. But, before that,

192.168.10.1 login

  • Check whether the connection is made precisely.
  • Check whether the Power, wide-area network, LAC and wireless local-area network lights are on.
  • The light must stay fixed for the power button. The other 3 diodes/lights must keep flashing or blinking.
  • After everything goes well, go to a web browser and type in the IP address http://192.168.10.1. An error message might be seen. Appearing the message means that 192.168.I.10 is the router’s incorrect IP address. Check for any mistakes or wrong spellings entered. There are possibilities that the autocomplete function of the browser is deceptive.

If one doesn’t remember his or her password & username, then he/she can get them by these simple steps given below

  • If the person has never changed the login name and password, it is suggested that a look at the list of default router passwords & usernames should be taken.
  • When access to the router’s admin is obtained, one can arrange his or her router perfectly how they want. 

How to change the IP Address of the Router?

Changing the IP address will temporarily interrupt all the programs/services the person is using on his or her device that is connected to the internet. Wi-Fi gives us the convenience of a perfect data connection that’s untethered. It also comes with disadvantages of security that hackers love to make use of. Therefore, for an extra step of security, remove networks that you don’t require from your preferred list of networks, disable auto-connect while connecting networks, do not use networks that are hidden, and change the IP Address. And for doing that, keep in mind the following points

  • Log into your account.
  • Open your browser.
  • Enter the default IP address of the manufacturer found in the user manual or on the below side of the router.
  • With the help of your login name and password, log into the page of the router settings.
  • Look into the setup tab that’s basic. You can find this option on a general settings tab. But sometimes, the place of this option will depend on the router.
  • Change the last or the second last, or both numbers in the IP address. You will have to do this in the LAN IP Address field. You can make use of any integer from 1 to 254. It will give you 64,516 possible IP combinations. That will make it more difficult for a person to find the IP address of the router.

According to TP-Link Routers

TPlink Router Login page

  1. Go to your world wide web browser.
  2. In the address bar, enter the pre-set Internet Protocol Address 192.168.10.1You will then see the router’s login page. It will contain two text options. There, you can put in a password and a username.
  3. ‘admin’ is the by default password & username for the TP-Link Kibosh router.
  4. In the router’s web login page, user interface, type in the login name and password.
  5. Click ‘Login’
  6. The control panel of the TP-Link will be seen.

For D-Link Routers

DLink Router Login

  1. Look into your web browser.
  2. In the address bar, enter the default IP Address 192.168.10.1
  3. You will then come across the router’s login page. It offers two text options. There, you can put in a password and a username.
  4. The default username & password for your D-link BCM96358 router is ‘unknown’.
  5. In the router’s web login page, user interface, type in the login name and password.
  6. Select ‘Login’.
  7. The control panel of the D-link BCM96358 router will be seen. 

For NetGear Routers

Netgear Router Login

NetGear is a multinational computer company of networking. It also has its shares in the stock market. It was founded on 8th January 1996.

  1. The default username & password for your NetGear JNR1010v2 router is ‘admin’ and ‘password’ respectively.
  2. In the router’s web login page, user interface, type in the login name and password.
  3. Click on ‘Login’ and now you will see the control panel of the NetGear JNR1010v2 router.

Conclusion

192.168.10.1 Admin

10.1 is among countless IP addresses which can be reached via the social internet. They are IP addresses that are considered private. Internet Assigned Numbers Authority (IANA) is a corporation that maintains the uniqueness of these IP addresses. It is a non-profit American corporation. It’s private and supervises worldwide IP address issuing for networks that are private. It is essential to protect the Wi-Fi network from any unauthorized access. And working on aspects like using a strong password, enabling WPA2 encryption, disabling WPS adds, enabling MAC-address, updating the router, etc. would surely help in protecting the network to a great extent. Default 192.168.10.1 login is:

IP Address – 192.168.10.1

  • Username – admin
  • Password – motorola

 

Also Check :-